DOSERAY

STORAGE – DOSING – CONVEYING

Sultan Makina Ltd. Şti.

+90 226 353 21 21
rotary valve internals

Rotary Valve Solutions

We offer rotary valve solutions for a variety of special requirements in industrial plants. The capacity of these units, which separate product from air beneath filters and cyclones, is determined by diameter and speed.

large-diameter rotary valve, airlock

Airlock

Various rotary valve and airlock types are developed for conveying product pneumatically. With wear-resistant, blower-compatible models, DOSERAY ensures reliable feeding of powder and granular products.

Rotary Valves for Abrasive Products

Cement, sand, calcite, cullet and mineral powders quickly wear out a standard carbon steel rotary valve. As the gap between the worn housing and rotor grows, leakage air increases and capacity falls.

Material and Coating

In wear-resistant rotary valves, the housing is made of Ni-Hard castings or Hardox plate, and the inner surface is reinforced with hard facing where necessary. Bolt-on wear tips are fitted to the rotor vanes, so when wear occurs only the tips are replaced instead of the whole rotor.

Operating Conditions

Wear increases with vane tip speed. For abrasive products, therefore, a large rotary valve running at low speed lasts longer than a small one running at high speed. Where the pressure difference is high, a vent port is recommended, since leakage air also accelerates wear. See our heavy-duty rotary valve page.

What Is a Rotary Valve?

A rotary valve is a vaned mechanical device generally used in pneumatic transfer systems (pressure and vacuum) to separate powder or granular product from air. It is widely used beneath filters and in cyclones in particular. Its diameter and rotational speed are the main factors determining its capacity, while the vane tolerances are the most important factor determining its efficiency. A rotary valve can also be used as a dosing feeder or as a proportional discharger beneath silos.

To sum up the various functions of a rotary valve: it mixes the product with air and, using gravity, separates the product from the pressurised air. Rotary valves come with different vane designs, tolerances and speeds depending on the type of process and the product used. Depending on the material, a rotary valve can also act as a crusher, or even work coupled with crushers. Rotary valves are manufactured in ST37 carbon steel, AISI 304 and AISI 316 stainless steel, Hardox and Ni-Hard. Bearing types and sealing elements (packing, mechanical seals, lip seals) of the rotary valve (airlock) also vary with the process. Rotors can be supplied with blade tips, rounded pockets, adjustable vanes, scrapers or polyamide tips, among other options.

The images below give you an idea of what the rotors look like. Although the units look the same from the outside, they differ internally, which opens up many options when selecting a rotary valve. Process data must therefore always be taken into account when choosing a rotary valve. The most important thing to remember is that not every rotary valve will work in every process.ATEX rotary valve

ROTARY VALVE - AIRLOCK - ROTARY FEEDER ROTOR TYPES

  • rotary valve rotor typerotary valve vane typesrotary valve vane typeairlock vane typestar feeder vane typerotary valve vane type 6rotary valve vane type 7rotary valve vane type 8
  • A1-A2-A3: Open vanes
    B1-B2-B3: Radiused/oval vanes
    C1-C2-C3: Adjustable and replaceable vanes
    D1: Rotary valve with closed or adjustable rotor (dosing)
  • Drop-Out Box and Eductor Solutions for Rotary Valves


    In some processes, although the rotary valve is part of a pneumatic conveying system, the orientation of the pipe inlet and outlet can cause problems during maintenance; removing pipework for maintenance is undesirable. In such plants, a standard rotary feeder can be used instead of a blow-through rotary valve (airlock), with a device that creates a venturi effect fitted underneath. This way, the connected lines do not have to be dismantled when servicing the rotary valve, which gives the process more flexibility.

  • rotary valve applicationhow a rotary valve operates

Our Rotary Valves

Our main principle in designing and manufacturing rotary valves and airlocks is to produce equipment for industrial plants with high sealing performance, minimal maintenance and maximum durability.


Wear-Resistant Rotary Valves

rotary valve dimension table
wear-resistant rotary valves

Wear-Resistant Rotary Valves and Airlocks

Rotary valves used in processes involving abrasive raw materials such as sand, ash, micronised calcite, dolomite, cement and quartz, particularly in the mining industry, must be built differently from their standard counterparts. These differences ensure that the process runs correctly and without interruption.
These differences fall under three headings:

1- Sealing elements (packing, lip seals etc.)
2- Wear-resistant housing design (lined or special alloy steel, Ni-Hard, carbide-type coatings)
3- Alloy steel rotors (Ni-Hard, Hardox, carbide-type coatings)

Internal design of the rotary valve: blow-through, standard and outboard-bearing rotary valves
Although various other features extend the service life of a rotary valve, these are the ones that can be considered in general. Our rotary valves can be manufactured in all sizes with any of the optional features required.
In addition, if the system operates under pressure, this pressure puts the whole system under greater load and accelerates wear. The abrasive raw material mixed with air tries to escape through the sealing elements in particular; over time this first damages the seals, causing dust emissions, and then damages the housing and end covers.

 

rotary valve, rotary valve air lock design and components

To prevent the process described above and to extend this natural process in a controlled manner, the right selection must be made. In such abrasive processes, equipment inevitably has a limited service life; what matters is avoiding unplanned shutdowns. Even if the rotary valve is damaged, it must keep running and, in 24/7 plants, last until the first planned shutdown.

READ MORE

Tags: rotary valve, airlock, rotary feeder, ash rotary valve, rotary valve for ash, wear-resistant rotary valve, pneumatic conveying rotary valve, rotary valve Ankara, rotary valve manufacturers, special rotary valves, pneumatic transfer rotary valve, rotary valve production, rotary valve feeder, stainless steel rotary valve, rotary airlock, rotary valve for spray dryers, blow-through rotary valve