DOSERAY

STORAGE – DOSING – CONVEYING

Sultan Makina Ltd. Şti.

+90 226 353 21 21
rotary valve

Rotary Feeder

Rotary valves for industrial plants are made from materials such as AISI 304, AISI 316 and Ni-Hard. Bearing and sealing types are selected to suit your process.

airlock, rotary valve

Airlock

Our airlock and rotary valve solutions for industrial plants separate the product from the air beneath filters and cyclones. We also offer models suited to hot and abrasive processes.

What Is a Rotary Valve?

A rotary valve is a device installed beneath filters or cyclones that separates powder or granular solids from the air.

How and Where Are Rotary Valves Used?

Airlocks, rotary valves and star feeders can be made of ST37 and ST52 carbon steel, Hardox, Ni-Hard, and AISI 304 or AISI 316 stainless steel. Bearing and sealing types (mechanical seal, packing, etc.) also vary with the process. Airlocks used in hot processes or for conveying highly abrasive materials are built to different specifications.
Ex airlock
Rotors can be supplied with bladed, rounded (radiused), adjustable-vane, scraper or polyamide options. The reason for so many options lies entirely in the type of material conveyed and the process. This choice is so important that a mistake can even damage the material being conveyed. Standard solutions can work well for flour, cement and many other materials; however, even small differences in particle size or material properties can cause these devices to stop performing. Rotary valves must therefore be selected for the process with great care.

Airlock – Rotary Valve Rotor Types

  • rotary valve rotor type
  • A1-A2-A3: Open vanes
    B1-B2-B3: Radiused (oval) vanes
    C1-C2-C3: Adjustable and replaceable vanes
    D1: Airlock with closed or adjustable rotor (for dosing)

Rotary Valve – Airlock

This type takes the product in at the top and discharges it at the bottom (also called an airlock or rotary valve).

Blow-Through Rotary Valve

This type takes granular or powder raw material from above and transfers it by gravity and mechanical motion into the pneumatic line below (also called an airlock or rotary valve). The only difference from a standard airlock is that, being used in pneumatic lines, it has pipe inlet/outlet connections or an eductor. Its design and sealing elements are built for pneumatic conveying.

Why DOSERAY Rotary Valves?

The guiding principle behind the design and manufacture of all our airlocks, rotary valves and blow-through valves is to build highly durable products for industrial plants.

Wear-Resistant
Products

rotary valve vane design

rotary valve interior

Rotary valves are mainly used to discharge material collected in pulse-jet filters and cyclones, in separators, and to feed material from hoppers into the pneumatic line; in short, to separate dusty material from the air and to dose it.

Pneumatic conveying processes differ by phase (dense phase, dilute phase) and also vary within the same phase. In low-pressure, i.e. dilute phase conveying, rotary valves can be classified into two groups: vacuum and pressure. Although minor, this classification leads to differences in rotary valve design. We therefore build the rotary valves for vacuum and pressure lines to suit your process.

rotary valve types

READ MORE

Tags: airlock, rotary valve, ash airlock, wear-resistant airlock, pneumatic conveying airlock, rotary valve manufacturing, rotary valve for ash processes, industrial airlock