Dust Extraction Systems with Mixer and Blender Suction Filters
Almost all the industrial products we use in daily life are made at the end of a process.
Raw materials in powder, granule and liquid form go into these processes.
Mixes are usually prepared in mixers; however, the quantities of material fed into these industrial-scale mixers are large, and these materials must not be allowed to spread into the surroundings.
At high capacities, intense mechanical agitation releases large amounts of dust, which must be removed from the area.
Dust extraction is done with filters. We produce dedicated filter solutions for mixers and blenders of every capacity.
These solutions are used in a wide range of applications, from carbon black to instant soup mixers, and from PVC hot-cold mixers to reactor feeding.

Cyclones and Pulse-Jet Filters
In pneumatic systems, the conical unit that separates dust from air by centrifugal action is called a cyclone.
When the air-dust/granule mixture arriving at a given airflow enters the cyclone, it slows down as the cross-section increases and forms a vortex.
As the fast-moving mixture enters a larger volume, the powder or granular material falls under gravity and centrifugal force, while the air exits to atmosphere. That, in short, is how cyclones work. Depending on the process, the cyclone inlet can be square, rectangular, round or tangential.
Our dust collection capabilities
All filter elements are designed to operate at temperatures up to 150 °C and to retain particles down to 5 microns; in small diameters, their pleated structure provides a large filtration area. Depending on the process, they are given surface polishing, calendering, Teflon impregnation, PTFE coating or special resin coating for the most efficient pneumatic conveying.
We know that a good dust collection system is one of the most important elements of pneumatic conveying. That is why we work with the best brands in Türkiye and worldwide.

