What Is a Rotary Valve?
A rotary valve is the rotating unit that feeds bulk solids to be conveyed pneumatically into the pneumatic conveying line. Its design can vary according to the process in which it is used. Although "rotary valve" is the general term, depending on the industry it may also be called a star feeder, airlock, rotary feeder or cellular wheel sluice.
Where Are Rotary Valves Used?
Although rotary feeders and rotary airlocks are essentially the same, they perform different functions. Any airlock can also be used as a rotary feeder in combination with an eductor. Whereas the rotary feeder mixes the product with air, the airlock uses gravity to discharge product that has been separated from the conveying air by a cyclone or filter. The vane design, tolerances and speed of rotary valves vary according to the type of process and the product to be conveyed. Depending on the properties of the material being conveyed, a rotary valve can also act as a crusher, or even work in tandem with crushers. Our rotary valves are made of ST37 carbon steel, AISI 304 and AISI 316 stainless steel, Hardox and Ni-Hard. Bearing types and sealing elements (packing gland, mechanical seal, lip seal) also vary with the process. Internal rotors are available with bladed, rounded, adjustable-vane, scraper and polyamide options. The rotary feeder is also called a blow-through rotary valve. Depending on your process, ATEX versions of all series are also available. ATEX is a certified protection class; ATEX-version airlocks are manufactured to comply with high-protection-class directives.
Main Types of Rotary Valves
Rotary Valve Rotor Types
-

- A1-A2-A3: Open vanes
B1-B2-B3: Radiused/rounded pockets
C1-C2-C3: Adjustable and replaceable vanes
D1: Rotary valve with closed or adjustable rotor (dosing)
Rotary Valve
This type takes granular or powdered raw material in at the top of the unit and discharges it at the bottom by gravity and mechanical motion (also referred to as an airlock or rotary feeder; the only difference is that, because it is used in pneumatic lines, it has pipe inlet/outlet connections or an eductor).
Wear-Resistant
Rotary Valves
Airlocks and rotary valves in all the sizes we produce can be built with the optional features your process requires.
If the system operates under pressure, that pressure places the whole system under greater load and accelerates wear. Abrasive raw material mixed with air tries to escape, particularly through the seals; over time this first damages the seals, causing dust in the surrounding area, and then damages the housing and end covers.
The right selection must be made to prevent the process described above, or to extend this natural process in a controlled way. In abrasive processes of this kind, the equipment inevitably has a limited service life. What matters is avoiding unplanned shutdowns: even when damaged, the rotary valve must keep running and, in plants operating 24/7, last until the first planned shutdown.
