Silo discharge systems with flap (flap bin activators)
The vibrating discharger with flap combines the functions of a bin activator and a shut-off flap in a single body. The flap at the outlet of the vibrating cone cuts off the flow when no product is being drawn, eliminating the need for a separate flap or slide gate valve under the silo.
Although a bin activator solves the fluidisation problem, vibrating feeders with a flap should be used for proportional flow and tight sealing. The system then acts as both a bin activator and a flap valve; vibration and the flap are activated only during feeding, and the outlet remains closed at all other times. In conventional bin activator systems, the space below the bin activator generally remains full, depending on the product's flowability; this solution keeps the line empty and safe.




Rotoflow / Bin Activator Operating Principle
When the discharge command is given, the vibration motor starts first and then the flap opens; the product flows towards the outlet under the effect of vibration. When the command ends, the flap closes and vibration stops after a short delay. This sequence prevents product from becoming trapped as the flap closes and keeps load off the seal.
Bin Activator Cone Types
-
The flap models are produced with various outlet diameters for use above batch processes such as weigh hoppers or big bag filling. The cone angle is selected to match the silo's existing cone.
Controlled Flow Solutions


Because the flap opening and vibration time can be set via the automation system, the unit can be operated in two stages: coarse and fine feed. This allows the weigh hopper to reach its target weight more precisely.
READ MORE