What Is a Silo Filter Control Board (Filter Timer)?
The pulse valves used in filters are opened and closed continuously at set intervals by a multi-output timing relay, cleaning the dust that builds up on cartridge or bag filters. This preserves the permeability of the filters. Cleaning is carried out by sending bursts of compressed air through timer-controlled pulse valves. The device that drives this shaking action is called a pulse control board, filter timer, electronic filter sequencer or pulse valve control unit.
* All outputs of the filter timer control unit are 4+4 plug-in modules; relay or triac outputs can be selected on request.
* If relay or triac outputs are damaged, only the output module is replaced, not the whole board.
* Industrial IP56 enclosure with transparent cover
* For use with 24 V DC or 110 V – 220 V AC solenoids (optional)
* Selectable transistor, relay or triac outputs
* Output intervals set by DIP switches
* 4–8 standard outputs (two modules)
* Additional solenoid valve can be connected to a single output
* Adjustable pulse interval (0–250 s)
* Adjustable pulse duration (100–1000 ms)
* Easily programmable DIP switches
* System start via external contact
* Output relay indicating that the system is running
* In systems controlled by an external relay, a 15-minute off-line cleaning function so the filter cleans itself after the process stops
* Additional pneumatic vibrator output relay for conical filters (on boards with vibration module)
* Ambient temperature: -10 °C to +120 °C
* Connection: all connections via spring-clamp terminals
* AISI 304 stainless steel base plate
* Mounting: easy mounting on the filter
* Thanks to its modular board and external power supply instead of a monoblock PCB, faulty parts can be replaced with universal products without contacting the manufacturer
* Special enclosure design for ATEX processes
* Compatible with all types of jet filter
Technical specifications
Operating voltage: 110/220 V AC
Operating frequency: 50/60 Hz
Supply power consumption: 25 W
Max. number of outputs per panel: 32
Max. output voltage and current: (24 V – 1 A) – (220 V – 6 A) – (110 V – 6 A)
All these features are also available in ATEX versions on request.
Process Control + Filter Timer Board
Depending on process requirements, more than one vibrator solenoid can be connected to each output of the filter control board.
V3 Vibrator Module Settings (Version 3)
On boards with an additional vibration module (4 outputs), the outputs are as follows. These outputs apply to the second relay module plugged into the main board. These settings can be made if the board is marked V3 (version 3). To activate the module, OUTPUT DIP switches 5-6-7-8 must also be set to ON. Operating modes:
Output 5: 20 s off, 5 s on (EV1 – relay – solenoid)
Output 6: 45 s off, 5 s on (EV2 – relay – solenoid)
Output 7: 60 s off, 5 s on (EV3 – relay – solenoid)
Output 8: 120 s off, 5 s on (EV4 – relay – solenoid)
Why Choose the DOSERAY Filter Control Board?

- The DOSERAY filter control board, also known as a filter pulse timer, is a critical piece of equipment that sets the timing and pulse intervals used to clean the filter media in all dust collection systems. Unlike comparable products, it works reliably with 220 V and 24 V AC/DC solenoid valves. It is indifferent to solenoid valve power ratings and is compatible with all universal solenoid valves; it can drive several solenoid valves of the same voltage but different power on the same filter. Moreover, whereas on comparable boards the power supply is on the board itself, the DOSERAY filter control board is powered by an external SMPS. In the event of a fault, only the power supply unit is replaced rather than the whole filter board, ensuring reliable use for many years.
