What Is a Venturi?
The venturi is, strictly speaking, a physical principle; the venturi used in our field is a device that works on the basis of this physical law. It is a simple arrangement in which compressed air in the pneumatic conveying line accelerates through a narrowing section, creating a vacuum that draws the bulk solid into the line and carries it onward. The venturi conveying systems we manufacture are made of AISI 304 stainless steel and offer a wide range of applications and a long service life.
Conveying raw materials (bulk solids) with a venturi
Conveying with a venturi injector (venturi conveyor), the counterpart of dilute phase pneumatic conveying, is a method with lower maintenance and investment costs than its alternatives and is preferred especially for granular raw materials. Venturi conveying is generally used for short-distance applications. In short, a venturi eductor can be described as a non-mechanical type of rotary valve (airlock) that operates on pressure and generates its own vacuum. It is ideal for conveying granular bulk solids.
In venturi eductor conveying, a blower or compressor is used as the air source. The venturi eductor works on the venturi principle, which is based on Bernoulli's principle. The aim is to increase the air velocity by narrowing the cross-section through which the air flows and thereby create a vacuum that draws in the raw material through an inlet connected perpendicular to that section. 

How does venturi conveying work?
In venturi conveying, compressed air accelerates as it passes through a narrowing throat, and the pressure drops at this point. The product is drawn into this low-pressure zone through a feed inlet mounted directly above the throat and is carried along the line with the air flow. There are no rotating parts in the system.
Cost-Effective Solutions with Venturi Conveyors
For short-distance, low-capacity conveying, the venturi is one of the pneumatic conveying methods with the lowest investment cost, as it requires neither a rotary valve nor complex control equipment. Returning dust collected under a filter or cyclone back to the process is a typical application.
Why choose venturi conveying?
Thanks to its maintenance-free design, small size and easy installation, the venturi is a practical solution, especially when an additional feed point is needed on an existing line. For long distances and high capacities, systems built with a blower and rotary valve are more efficient.
READ MORE