DOSERAY

STORAGE – DOSING – CONVEYING

Sultan Makina Ltd. Şti.

+90 226 353 21 21

Pneumatic Transfer Systems

 dense phase conveying 2dense phase conveying
Dilute Phase Pneumatic Conveying

Pneumatic transfer works on two basic principles. In pressure systems the air source is at the start of the line and pushes the product; this suits long distances and distribution from one point to several destinations. In vacuum systems the air source is at the end of the line and draws the product; this is preferred for collecting product from several points and when dust-free operation is required.

In both systems, equipment is selected in the same way: the bulk density, particle size, moisture, abrasiveness and temperature of the product are determined, and the air volume and pressure are calculated together with the required capacity and distance. The feeding device, pipeline, diverter valves and receiving filter are then sized on the basis of this calculation.

During commissioning, the line is tested with the actual product; pressure and flow values are measured and the automation is tuned accordingly. This way the system reaches its design capacity from day one.

Dilute and Medium Phase Pneumatic Conveying Processes

rotary valvepneumatic conveying

Pneumatic Transfer with Vacuum Conveyors
vacuum transport
 

Tags: pneumatic conveying, pneumatic transport, pneumatic transfer, air conveying, blower conveying, dense phase transfer, silo discharge systems, rotary valve, airlock, screw conveyor, vacuum pneumatic transfer, vacuum product conveying, vacuum conveyor