Screw Conveyors – Mechanical Conveying
We manufacture different types of screw conveyors (auger conveyors) depending on the properties of the material to be conveyed. Our screw conveyors vary by housing type and flight type:
1. Tubular screw conveyor
2. U-trough screw conveyor
3. Conical screw conveyor
4. Flexible shaftless screw conveyor
Based on the information you provide, we manufacture all screw and auger conveyors in diameters from 33 to 425 mm.
Depending on how they are fed, screw conveyors can work as feeders, conveyors or dosing units. If a screw conveyor is fed consistently at the same rate, it can also meter the material at that same rate while conveying it. This principle applies to tubular ("O"-type) screw conveyors. The capacity of an auger conveyor is proportional to the pitch of the flights and the motor speed. All stainless steel screw conveyors we manufacture are designed to CEMA standards.
By flight type, in the required material and thickness:
- Continuous-flight screw conveyors
- Cut-flight screw conveyors
- Ribbon-flight screw conveyors
- Screw conveyors with increasing pitch
- Screw conveyors with decreasing pitch
- Screw conveyors with tapered flights
- Flexible-flight screw conveyors
- Shaftless screw conveyors
- Auger conveyors with wear plates
These are the options we manufacture.
Vibrating Conveyors
A conveying method used mainly in short-distance applications and in sorting/orienting and packaging systems. It provides an even transfer and is generally used for products of uniform particle size. Pharmaceutical machinery and nail-feeding systems are typical examples.
What Is CEMA?
CEMA is perhaps the most important standard to consider when manufacturing a screw conveyor or auger. It brings together the standards that key elements such as bearings, inlets and screw type must meet.
Micro dosing and custom fabrication
Screw flights are made by cold drawing; for large-diameter screws, laser cutting followed by drawing is used. Our production programme covers both complete assemblies and semi-finished parts (flight and shaft). Very small screws are also known as micro-dosing screws.
Standard Screw Conveyor
Types
The screw conveyors we manufacture work as conveyors in short-distance applications. With double-flight or ribbon-flight designs, they can also be used as mixers. The stainless steel screw conveyors built in our workshop are designed to CEMA, taking into account flight diameter, pitch, capacity, inlet/outlet type, operating angle, operating pressure (if any), bearing type, the type of material to be conveyed, particle size and friability. Where necessary, the flights are coated or lined with polyamide, cast nylon (Kestamid) or PTFE. Most of our screws are made from cold-formed flights. Although these appear standard, they can also be manufactured with different flight geometries to suit the process. Our most commonly used screw conveyor types are:
- 1. O-tube stainless steel screw conveyor
2. U-trough stainless steel screw conveyor
3. Conical stainless steel screw conveyor
4. Flexible shaftless stainless steel screw conveyor Based on the information you provide, we manufacture all our screw conveyors and screws with flight diameters from 15 to 1,000 mm. -

