Pipe couplings and bends for pneumatic conveying
The equipment that seamlessly connects pipes in pneumatic product conveying lines is called pipe connection couplings; these couplings are used together with long-radius bends that allow bulk solid raw materials (plastics, powders, granules) to be conveyed as easily as possible. As there are only a few major manufacturers worldwide, couplings are also known by their makers' names: Morris coupling, EURAC coupling, Lorenz coupling and so on. Pipe connection couplings are made from durable materials and withstand demanding process conditions. They are designed and manufactured in various configurations to the highest standards of tightness and safety, keeping your operations running reliably and without interruption.
Couplings are developed for all vacuum and pressure applications and, depending on the process, are made of aluminium, galvanised steel, or AISI 304 or AISI 316 stainless steel.
Gasket materials are white neoprene, silicone and NBR, suitable for all processes. An internal earthing strip transfers static charges generated during conveying to earthed equipment, eliminating the extra cost of external earthing.
Four pieces of information are needed to select a coupling: pipe outside diameter, line pressure (or vacuum), temperature of the conveyed product, and whether the product is in contact with food.
This information determines the combination of clamp housing (aluminium, galvanised steel, AISI 304 or AISI 316) and gasket material (NBR, white neoprene or silicone). The wrong gasket choice may require early replacement because of temperature or food-contact suitability.
.
Mid-range "HD" series couplings
The HD series is sufficient for general-purpose dilute phase lines.
Heavy-duty "H" series couplings
The heavy-duty H series should be chosen for dense phase lines subject to pressure surges and for the lower sections of vertical lines. A connection separating at these points leads to both product loss and a safety risk.






What are the advantages of pipe connection clamps?
Suitable for gas lines and requires no special tools for installation.
Different configuration options are available to cope with ambient vibration.
Easy to remove and refit.
Provides a high level of tightness.
Can be used on all DN-standard pipe diameters.
Compatible with ATEX systems and self-earthing.
Much easier to install than equivalent flanged connections.
Requires no welding and is user-friendly.
Reliable design.
Cost-competitive compared with equivalent methods.
Suitable for food processes; with food certification, it can be used in all food processes. Its design prevents microbial contamination, making it a preferred choice on CIP lines.
Quick connections are very widely used in the piping of pneumatic conveying systems, as they are faster and more economical than flanged connections.
Long-radius
bends

For abrasive products, bends can be replaced with basalt- or ceramic-lined models; thanks to the coupling connection, this can be done without cutting the line.





