DOSERAY

STORAGE – DOSING – CONVEYING

Sultan Makina Ltd. Şti.

+90 226 353 21 21
aero mechanical conveyor

Cable Conveyor

Tubular cable disc conveyors carry all kinds of bulk solids, above all granules and powders, in an enclosed line. They offer a flexible alternative to pneumatic and mechanical conveying.

aero conveyor

Aero-Mechanical Conveying

Aero-mechanical conveyors are a more flexible way of conveying bulk solids than screw conveyors. They are used with confidence especially for fragile and hygroscopic materials.

Conveying with disc and steel cable conveyors

Although the names vary from manufacturer to manufacturer, these systems are known as tubular cable, aero-mechanical or disc conveyors and are regarded as an alternative to pneumatic and mechanical conveying. While there are several variants, they can be used for all bulk solids, above all granules and powders. In terms of flexibility and application they are more limited than pneumatic conveying but more flexible than screw conveyors. They are used particularly for fragile and hygroscopic materials. They provide quiet, dust-free, highly energy-efficient, wear-resistant and effective conveying. We manufacture the disc and cable conveyors your processes need in-house, and we handle high-speed aero-mechanical conveyor systems together with our partners abroad.

 cable conveyorcable conveyoraero conveyor

Our tubular disc conveyors are mainly built in three diameters, the most common being 76.1 mm. They are used to convey all kinds of dry bulk solids to silos or to the process. Operating costs are very low compared with pneumatic and mechanical conveying. They are also equipped with electronic devices that keep the line running continuously within the process, which gives the conveying system a longer service life. Although we have solutions up to 50 metres long, this figure can vary with the type of product and the capacity. In addition, disc conveyors offer more solutions for ATEX environments than other conveying methods, and each project can be individually certified. Capacities are as follows:

76.1 mm – 3 m³/h

114 mm – 15 m³/h

169 mm – 45 m³/h

What Are Aero-Mechanical and Disc Conveyors?

  • An aero-mechanical conveyor consists of a steel cable assembly fitted with evenly spaced polyurethane discs that travels at high speed inside a tube.
    The cable assembly runs over specially designed sprockets at each end of the conveyor. Moving the cable assembly at high speed creates an air stream travelling at the same speed.
    When material is fed into the air stream of the aero-mechanical conveyor, it becomes fluidised and, assisted by centrifugal force, is carried to the outlet. Aero-mechanical conveyors run at higher speeds than cable conveyors and also have higher capacities. Below you can see tubular aero-mechanical and disc conveying applications in various layouts. The main feature that distinguishes aero-mechanical conveyors from cable conveyors is the angled tubes used at the bends. Because the speed is higher in an aero-mechanical conveyor, an additional disc bearing arrangement at the bends relieves the system.

Tubular Disc Conveyor Types

  • aero conveyor
  • 1- Z layout, 2- L layout, 3- Circular layout, 4- Straight layout, 5- Transfer layout, 6- U layout

Disc Conveyor Dimensions and Use

Tubular cable conveyors carry all kinds of powders and granules between two points and can work flexibly both in hygienic environments and under the toughest conditions. They offer features such as CIP cleaning, air-knife cleaning, brush cleaning, and loading at a single point with discharge at several points. They can also run horizontally, vertically and across different heights. The dimensions of systems that take product from a single point and discharge it at different points, according to the conveying layouts shown above, are as follows.

Why an Aero Conveyor?

The guiding principle behind our design and manufacture of tubular cable conveyors is to build products for industrial plants that need minimal maintenance and offer maximum durability.

Alternative Mechanical Conveying
Solutions


cable drag conveyor

Our tubular cable conveyor systems have a modular design so that they can adapt flexibly to the needs of any processing plant. Components can be connected in more than one direction and customised to create the best conveying solution, for example for feeding, discharging and angling.

READ MORE

Tags: aero conveyor, aero mechanical conveying, cable conveyor, disc conveyor, tubular disc conveyor, mechanical disc conveyor, mechanical tubular disc conveyor, tubular conveyor, disc-in-tube conveying