DOSERAY

STORAGE – DOSING – CONVEYING

Sultan Makina Ltd. Şti.

+90 226 353 21 21
explosion vent

Explosion Vent

Explosion vents protect equipment by relieving sudden pressure build-up in silos, hoppers and mixers in a controlled manner. DOSERAY offers safety solutions matched to your process against the explosion risk in dusty environments.

explosion vent 2

Ex Processes

In Ex processes, suspended dust, temperature and oxygen level create a constant explosion risk. With explosion vents and inerting solutions, DOSERAY keeps these risks under control and ensures safe operation.

Explosion Vents and Inerting

In short, inerting means bringing conditions to acceptable values by eliminating explosion and fire risks so that the process can run safely. It is reasonable to consider inerting for storage areas, reactors, process lines or silos in general. Suspended dust combined with critical temperatures and high oxygen levels means the risk is always present. In such hazardous processes, the main objective is to keep under control all the factors that could lead to an explosion. Finally, we can add to this the scenario of how a silo, hopper or closed vessel should fail if it does explode.

Explosion vents prevent or minimise the unpredictable consequences of a major explosion caused by high pressure building up inside a storage area containing combustible dusts, particularly food, chemical and petroleum-derived dusts. It must be remembered, however, that explosion vents never prevent an explosion; what they prevent are its unpredictable risks.

Systems that prevent explosions are inerting systems, which are more complex and have their own built-in control mechanisms.

Explosion vents open the system to atmosphere in a controlled way for a number of reasons: the pressure in a closed volume exceeding controllable limits, the relief valve being insufficient, the filter (if any) being out of action, the material having a low flash point, and other physical and chemical properties. In short, this means securing the explosion and bringing the closed volume back to atmospheric conditions.

This diaphragm, known as an explosion vent panel or rupture panel, is like a seat belt in a car or a fire extinguisher. Its purpose is to protect the storage area at the moment of an explosion, even to direct the explosion according to a defined scenario, and to prevent damage to the surroundings. Even if this equipment fitted to a silo or hopper never opens once in its service life, that does not change the fact that it must be used. We must have a scenario for every volume that contains explosive or combustible products.

Depending on the process, explosion vents are designed to work under vacuum or pressure. We serve industry in this field through our partnership with Vigilex. The products are made in square, rectangular and round shapes. Vacuum and pressure resistance directly affect the type of explosion vent.

Explosion vents that rupture to bring the space back to atmospheric pressure are used as standard in the range -200 / +500 bar, but special explosion vents up to +1 bar can also be manufactured depending on the process.

In Which Processes Are Explosion Vents Used?

Some very simple examples: explosion vents must always be used for storing dusts that can ignite at low temperatures, such as sugar, cocoa, combustible fatty powders and coal dust. These examples are given because these products are so widely used; many more could be added, such as various liquids, gases, processes and dryers. What matters is that there is a risk of fire and explosion in a closed volume. Occupational safety, which is becoming increasingly important in Türkiye and worldwide, also makes it necessary to use these products in pneumatic conveying, filters, cyclones and similar applications. Just as Ex-rated motors have become part of everyday life, explosion vents will soon be widely used regardless of whether the area is classified as Ex.

vigilex explosion vent flame

explosion ventexplosion vents, elevator explosion ventcyclone explosion vent

Ex Processes

Any combustible dust in suspension will ignite when it meets sufficient oxygen and an ignition source. It is therefore essential to take this risk into account when designing processes.

Example: Conveying sugar pneumatically from an icing sugar mill.

Although this example may look harmless at first glance, we must accept that every pneumatic conveying process is a static electricity generator. In other words, our source of electricity and sparks is already present.

Example explosion vent solution

How should the process be designed for the example above?

1. Attention must be paid to earthing in the pneumatic conveying line to prevent static electricity, and pipe couplings that provide earth continuity must be used at the pipe joints.

2. The pneumatic conveying air must be cooled to at least ambient conditions, and conveying should be carried out with nitrogen from a nitrogen generator or another inert gas.

3. Filter elements must be selected in compliance with ATEX.

4. Where possible, the motors used in the system should be Ex-proof (ATEX).

5. An explosion vent must be used.

6. A gas analyser should be added to the process, and inert gas should be injected according to the measured concentration.

7. If the system has a pulse-jet filter, nitrogen or CO₂ should be used as the cleaning gas.

Why an Explosion Vent?

The damage explosions cause to people, the environment and workplaces can be far greater and more irreparable than that of other workplace accidents. Occupational safety must therefore never be overlooked, and it makes the use of explosion vents essential in hazardous or high-risk processes.

Inerting
System Application

explosion vent

1. Warning beacon
2. Oxygen, carbon monoxide and heat detector/probe
3. ATEX filter
4. Explosion vents
5. Temperature and level readings taken at multiple points
6. ATEX level, pressure, humidity and other probes
7. Pressure relief valve
8. Inert gas manifolds
9. Silo/hopper built to DIN or the relevant standards
10. Silo filling nozzle
11. Silo discharge system
12. Inert gas cylinder banks
13. Earthing
14. Discharge system
15. Aeration (fluidising) pads

READ MORE

Tags: explosion vent, dust explosion, explosion prevention, explosion panel, explosion vent panel, vent panel, rupture disk, vigilex, vigilex explosion vent, vigilex turkey, stiff vent panel, stiff turkey, filter explosion vent, elevator explosion vent, silo explosion vent, hopper explosion vent, flour silo explosion vent, sugar silo explosion vent, starch silo explosion vent, mill explosion vent, dryer explosion vent