What Is an Air Cannon (Air Blaster) Bridge Breaker?
Air cannons are mechanical flow-aid devices used to prevent flow problems, particularly with hard-to-flow bulk solids (calcite, etc.). They are an effective way to mobilise low-density bulk solids. They are ideal for moving irregularly shaped bulk solids. Although an air cannon is an auxiliary flow-aid system, it has a much wider range of applications than comparable devices. It can be scaled for hoppers and silos from 0.1 to 500 m³.
Also known as a silo discharger, this innovative bridge breaker is fully compatible for mounting on silos and hoppers. It can be easily retrofitted to existing plant equipment and eliminates manual intervention, hammering and rodding. When bulk material builds up inside kilns, silos, bins, chutes and other equipment, and flow stops due to bridging and rat-holing, a DOSERAY air cannon is the best way to get the material moving again. Air cannons are highly effective on materials such as coal, cement and aggregates, especially when these materials retain some moisture and become sticky. They are also used effectively in filter cones.
Multi-valve models that distribute air to up to five points via pipes or hoses are also available to suit confined spaces.

What Are the Advantages of Air Blasters and Air Cannons?
Reduces noise and dust in the working environment.
Reduces segregation during material flow.
Minimal maintenance
Minimal operating cost
Hygienic design and manufacture
S235JR steel, AISI 304 or AISI 316 stainless construction
CIP: easy cleaning in place


Bridge Breaking and Flow Activation with Air Cannons
Air cannon systems easily solve bridging problems in hoppers handling organic bulk solids, bran, feed and ash. They are used effectively for pneumatic activation of bulk materials in silos and processing plants. In most cases the plant's standard compressed air supply is sufficient; air cannons perform best at an air pressure of around 5–6 bar.
Bridge Breaker Types and Operating Principle
-
Specialising in innovative products for bulk solids, DOSERAY offers a wide range of air cannons together with a broad selection of application-specific components to combat blockages, bridging and lump formation in pipes, silos and hoppers.
The system, consisting of a pressure vessel with a quick-opening valve, a safety controller and multiple blast valves, can also be supplied as a turnkey installation. The compressed air tanks are mounted directly on the conical chute, silo or hopper wall. Holes of 33–80 mm are drilled in the vessel wall near the areas of poor flow. A 2 ½” pressure hose is then fitted between the pressure vessel and the air blast nozzle mounted on the inside of the vessel wall.
A blast of compressed air lasting only a few milliseconds passes through the large-bore pipe and is released into the critical material zone through the blast valve. The blast mobilises the compacted material so that it continues to flow by gravity.
The air cannon is connected to a 1 ½” compressed air line and a collective cable for valve control. The trigger valves on the pressure vessels are actuated by the control unit, together with all integrated safety and air preparation elements. The control functions can be set for manual push-button operation, automatic operation or activation by a fault signal.
Flow-aid solutions for flat-bottomed silos
For continuous discharge from flat-bottomed vessels, special 45° lance nozzles that simulate the 45° cone angle of a silo are arranged around the discharge point. This arrangement significantly increases the feed capacity of flat-bottomed vessels with underfloor discharge.
Versatility and maximum effectiveness
The DOSERAY air cannon system is designed to solve the specific problems of each situation. Pressure vessel volumes range from 36 to 100 l, and as many blast valves as required are arranged around the material vessel. The air cannons can be positioned individually to fit flexibly into the available space. In addition to 45° nozzles, straight, angled and fan nozzles are used, so that every air blast directed at a specific point easily mobilises the compacted bulk material.
No More Bridging Problems
Depending on the properties of the product, flow problems can occasionally occur when discharging a silo or hopper; this points to a missing piece of equipment in the process. Bridging is the most common of these problems. The air cannon, also known as an air blaster, plays an effective role in solving rat-holing and bridging problems.
Applications of the Air Cannon Bridge Breaker

Air cannon bridge breakers are used with materials such as silica, calcium carbonate, titanium oxide, carbon, toner, ink, diatomaceous earth, glass fibre, textiles, paper dust, wood waste, shredded waste plastic, paints, pigments, spent tea leaves, burnt ash, dried cake, activated carbon, oil cake, collected dust, pharmaceuticals, agrochemicals, citric acid and more.
READ MORE