DOSERAY

STORAGE – DOSING – CONVEYING

Sultan Makina Ltd. Şti.

+90 226 353 21 21
torex level sensor

Torex

Silo and hopper level measurement: TOREX Spa level indicators. An effective solution for bulk solids level control.

torex level sensor

Level Solutions for Ex Areas

We supply WAM and TOREX silo and bulk solids equipment, level measurement, vibrating sensors and applications for Ex areas. An effective solution for bulk solids level control in silos and hoppers.



TOREX level sensor TOREX® Level Sensor Solutions

TOREX rotary paddle, vibrating fork and capacitive level sensors are generally used in silos (to measure bulk solids in enclosed volumes) and hoppers. These sensors detect the fill level and are available in voltage options such as 220 V and 24 V DC/AC. Torque adjustment and fork/probe lengths ensure that exactly the required point is measured. ILTC0 and ILtd0 are the models most commonly chosen for processes. ATEX versions of all TOREX level sensors are available to match the Ex classification of the area of use. Because rotary paddle level sensors turn at 1 rpm, they are used where fast detection is not wanted (the flickering problem of capacitive sensors). This is the main reason they are preferred, especially for bulk solids. Sensitivity can be increased with a double paddle. They can operate at -200 mbar vacuum, +100 mbar pressure and -20/+80 °C.

Why Use a TOREX Vibrating Level Sensor?

In addition, ILV series vibrating fork sensors allow reliable level measurement in processes with conditions such as high pressure and high vacuum. For this reason, depending on how critical the process is, adjustable vibrating level sensors are preferred at vital points. Vibrating sensors have more protection features and internal systems than rotary paddle sensors, so their safety level and response performance are higher. Moreover, impacts from bucket elevators or pneumatic lines can damage the paddle or the very low-power motor of rotary paddle sensors and cause failures. In processes exposed to water or subject to CIP procedures, vibrating sensors are also the solution to such problems.TOREX ILTD0

TOREX ITLC0, ILtd, ILT, ILV

TOREX Rotary Paddle Level Sensor CatalogueTOREX ILT Rotary Paddle Level Sensor Catalogue (PDF)

TOREX Measurement Solutions

Reliable level measurement solutions for hoppers, silos and bulk solids. Adjustable sensitivity and probe lengths, a wide range of ATEX level indicators for Ex zones, and special vibrating sensors for special processes.

 

 

TOREX Sensor Applications

torex level indicator torex ilv sensor, ilva
TOREX ILVtorex level measurement, iltd, iltc, atex

  • - Cement silos
    - Calcite silos
    - Gypsum silos
    - Process PVC and powder storage silos
  • - Various hoppers and enclosed volumes containing bulk solids

  • Options:
    Wide-range supply voltage: 220 V, 48 V, 24 V DC/AC
    Shaft extensions of 500 and 1000 mm
  • A wide product range for Ex atmospheres, according to zone classification.
  • Double paddle for faster detection
  • Features:
  • ATEX Level SensorsATEX level sensor

  • ILT 24V WS ATEX II 1/2 D "dust EX" ILTA0AX
    ILT 48V WS ATEX II 1/2 D "dust EX" ILTA0BX
    ILT 115V WS ATEX II 1/2 D "dust EX" ILTC0AX
    ILT 230V WS ATEX II 1/2 D "dust EX" ILTC0BX
    ILT 24V GS ATEX II 1/2 D "dust EX" ILTD0AX

  • TOREX is a registered trademark of WAMGROUP (Italy) and its Turkish importer WAM EURASIA Makina.
READ MORE

Tags: torex level sensor, torex spa level indicator, torex ilv vibrating level sensor, level sensor, silo level sensor, hopper level sensor, rotary paddle level sensor, motorised level sensor, vibrating level sensor, atex level sensor, vibrating atex level sensor, level sensor for Ex areas, level switch, torex level switch, torex level probe, torex silo level indicator, level sensor sales