DOSERAY

STORAGE – DOSING – CONVEYING

Sultan Makina Ltd. Şti.

+90 226 353 21 21
slide gate valve, slide gate

Slide gate

Our knife gate valves act as shut-off devices between processes handling powdered and granular bulk solids. By shutting off the feed under silos and hoppers, they make maintenance work easier.

slide gate valve

Slide gate valve

A slide gate valve is a mechanical shut-off device that provides dust-tight sealing in atmospheric applications. It is built in sizes to suit your process for use under silos and hoppers and above equipment.

Slide gate and knife gate valve solutions


A slide gate valve, also known as a gate valve, is a mechanical shut-off device that generally provides dust-tight sealing in atmospheric applications. It is used for powdered and granular bulk solids. Although it is also referred to as a knife gate valve, it is not recommended for use under pressure unless specially designed. In atmospheric applications, its main function is to act as a shut-off between processes.

It is widely used under silos and hoppers and above equipment. As well as shutting off the feed to the system, it stops raw material flow at the point where it is installed during
maintenance work.

Slide gate valves come in three versions: pneumatic, manual and motorised. Pneumatic and electrically actuated models can also send open/closed signals to the process automation via
limit switches.

They can be made in AISI 304, AISI 316 and painted ST37, with different clearances depending on temperature and process conditions. Sealing elements and bearing types also vary, with options such as rolling bearings, Kestamid and PTFE. Although gate valves look the same at first glance and serve the same function, they have different features depending on the process. Standard production sizes range from 150 mm to 500 mm; custom versions up to 1,000 mm are also available.
They are preferred in processes discharging coarse products; under hoppers, filters and silos where air tightness is required; in vacuum and pressure processes; in interconnected processes with differential air pressure (vacuum conveyors, pressure conveyors); and, with their double-blade design, in both feeding and discharging processes for products that bridge and flow poorly.

slide gate, knife gate valve slide gate, knife gate valve

slide gate dimensions

Slide gate and knife gate valve dimensions

TYPE A Ø B Ø C D E N°E Ø F Bolts G H kg
Ǿ150 150 165 261 15,5 115 2 12,5 M10 455 115 15
Ǿ200 200 215 311 15,5 93,3 3 12,5 M10 555 115 20
Ǿ250 250 265 361 15,5 110 3 12,5 M10 650 115 25
Ǿ300 300 315 431 23 128,3 3 12,5 M10 765 115 30
Ǿ350 350 365 481 18 89 5 12,5 M10 900 125 40
Ǿ400 400 415 531 15,5 100 5 12,5 M10 1.000 125 50

Slide gate valve blade types

  • 1- ST37-42, Hardox and alloy steels
    2- AISI 304 / AISI 316 stainless steel
    3- Ulpolen, PTFE and sintered linings

Industrial-grade valves

The guiding principle behind our manufacture of slide gates and gate valves is to build products for industrial plants with high sealing performance, minimal maintenance and high durability.

Wear-resistant
valves


 

Our slide gate valves and knife gate valves can be built in every diameter we manufacture, with any optional features required.

Although double flap valves have various features, they come in two main types: electrically and pneumatically actuated. Beyond that, they vary according to the product properties, pressure and temperature of the process in which they are used. The flaps and valve body can be made in S235JR, ST42, AISI 304 or AISI 316.

In double flap valves, each flap plate has a pneumatically operated cylinder and a solenoid valve. Valve timing is controlled by an electronic signal sent to the solenoid valves. This operating method is designed to ensure that the flaps open and close at the right time and in the right sequence.

READ MORE

Tags: slide gate valve, slide gate, gate valve, knife gate valve, wear-resistant valve, double flap valve, valve manufacturing, valve manufacturers