DOSERAY

STORAGE – DOSING – CONVEYING

Sultan Makina Ltd. Şti.

+90 226 353 21 21
flour dosing, water dosing, automatic flour weighing

Flour Weighing

Automatic flour weighing systems weigh flour conveyed pneumatically from the silos using load cells and send the exact quantity to the mixers. DOSERAY offers accurate, hygienic weighing solutions for food manufacturers who use flour in high volumes.

automatic flour weighing systems

Dosing Systems

Flour is extracted pneumatically from beneath the silo by a blower and weighed precisely at load-cell weighing stations. DOSERAY automatic dosing systems deliver the right quantity of sifted flour to your mixers.

Flour dosing systems

A common problem for all food producers working with flour is storing it and delivering it correctly from the storage area to the mixers, weighed and sifted. As shown in the flour dosing photos on this page, flour is extracted pneumatically from beneath the flour silos with a blower and then weighed with load cells, at weighing stations for mobile mixers or in fixed cyclones above the mixer for stationary mixers.

Automatic flour weighing systems are processes designed especially for tunnel ovens and for pizza, dumpling and puff pastry producers who consume large amounts of flour. The turnkey flour dosing processes we install also include dosing of water and other additives.

flour dosing sifter

Cooling and Conditioning in Pneumatic Flour and Sugar Processes

Conditioning units change the temperature and humidity of the atmospheric air used in processes. During pneumatic conveying, the air leaving the blower can reach 55-80 °C due to compression, and this heated air can change the properties of the conveyed raw material. Special dehumidification and cooling processes are also used when conveying hygroscopic materials that are affected even by ambient relative humidity.

This calls for advanced units that cool and dehumidify the air. For such processes we offer the following solutions:

1- Silica gel based mechanical cooling and dehumidification (dew point -40)

2- Refrigerant cooling: dehumidification and cooling down to a dew point of +2 / +4

3- Atmospheric cooling (cooling down to atmosphere +10 °C)

cooler

Flour and Sugar Dosing

Flexibility is the main reason why pneumatic transfer is the preferred choice in flour and sugar dosing processes. Easy maintenance and overhaul, few wear problems and simple installation are further reasons.

Flour and Sugar
Weighing

flour weighing systems

Mobile bowl and automatic flour-water weighing system

Stable mixing ratios in your products are directly linked to the quality of your work.
Using more raw material than necessary may at first seem to improve product quality, or the tolerance of your process may compensate for such errors.
But whether or not they can be compensated, you should use exactly the targeted quantity of each ingredient in your mixes in one go.
To achieve this and avoid incorrect mixing ratios of any kind, too much or too little, you need the right methods and tools.

This is where we become your solution partner.

Tags: flour conveying systems, flour dosing, automatic flour weighing systems, flour storage, flour silo systems, flour and water weighing, flour and water dosing, water dosing, bulk tanker flour systems