Silo Safety Valve
Adjustable, process-specific safety valves balance the positive and negative pressure that builds up inside silos and hoppers. DOSERAY designs these valves as a single integrated unit for pressure and vacuum, suitable for blower-driven pneumatic conveying systems.
Silo Safety Valves
What Is a Silo Safety Valve and How Is It Used?
Pressure and vacuum relief valve is the general name for specially constructed equipment designed to balance the positive and negative pressure that builds up inside silos, enclosed volumes and hoppers. By design, it relieves any positive or negative pressure outside the operating limits.
The safety valves we manufacture are designed as a single integrated unit for both pressure and vacuum. They are also suitable for use with blowers in pneumatic conveying systems.
Thanks to its special design, it displays pressure on its -1.0 / +1.5 bar gauge, and its proximity sensor sends a signal when the maximum vacuum and pressure values are exceeded.
In addition, its pressure transmitter can send an analogue 4-20 mA signal to the PLC, SCADA and DCS systems controlling the process.
Safety valves are available in RAL-painted, AISI 304 and AISI 316 versions and can be used in many industrial storage and conveying processes, especially in the chemical, mining, pharmaceutical and food industries. Thanks to its innovative design, the disc has a very long service life.
PDF CatalogueDOSERAY General Product Catalogue (PDF) 
Safety Valve Applications
On silos and hoppers
On pneumatic lines
On all vacuum and pressure lines with blowers
With vacuum pumps
With explosion vents
Silo and Process Safety Valve Features
On safety valves, metal surfaces in contact with the material are made of carbon steel or stainless steel. Safety valves are manufactured to DN standards in sizes such as DN80, DN100 and DN200.
Temperature range: -40 / +120 °C
The safety valve is designed for heavy duty and has high impact resistance.
The vacuum disc is made of silicone-coated steel (max. temperature 250 °C). Minimising material build-up, the vacuum disc can easily be cleaned with a brush.
Product-contact surfaces of the body are available in carbon steel or stainless steel.
The flange can be made of carbon steel or stainless steel (optional AISI 304, AISI 316).
Unlike similar products, it can operate under vacuum and pressure at the same time.
Explosion vents and venting panels used in ATEX (Ex) processes are generally single-use. In processes that must operate at atmospheric pressure, the panel can rupture in the event of a pressure rise (100 mbar). Using a safety valve in such processes is therefore strongly recommended; it is essential equipment for Ex processes.
silo safety valve, relief valve, silo relief valve, process vacuum valve, hopper and silo protection valve, silo pressure relief valve, vacuum relief valve, pressure relief valve, marine-type relief valve